Training Machinists with an Automation Mindset with Titan Gilroy, Ep #1

Lights Out: Technology and Automation Podcast by MakingChips

Player FM - Internet Radio Done Right

اضافه شده در thirty-seven هفته پیش

محتوای ارائه شده توسط Nick Goellner. تمام محتوای پادکست شامل قسمت‌ها، گرافیک‌ها و توضیحات پادکست مستقیماً توسط Nick Goellner یا شریک پلتفرم پادکست آن‌ها آپلود و ارائه می‌شوند. اگر فکر می‌کنید شخصی بدون اجازه شما از اثر دارای حق نسخه‌برداری شما استفاده می‌کند، می‌توانید روندی که در اینجا شرح داده شده است را دنبال کنید.https://fa.player.fm/legal

Via Podcast

1
Close Encounters with UFO Hot Spots: Area 51, Roswell, and the Great ET Road Trip 39:50

15 روز پیش39:50

پخش در آینده

لیست ها

پسندیدن

دوست داشته شد

39:50

The truth is out West! We’re hopping on the ET Highway and venturing to the most notorious alien hot spots, including Roswell’s infamous crash site, Area 51’s eerie perimeter, and a mysterious desert watchtower. Join us as journalist Laura Krantz, host of the podcast Wild Thing , beams up to share stories from the front lines of UFO reporting—from strange sightings and quirky festivals to a mailbox where people leave letters to extraterrestrials. Maybe you’ll even decide for yourself: Is Earth a tourist stop for spaceships? UFO hot spots you’ll encounter in this episode: - UFO Watchtower (near Great Sand Dunes National Park, Colorado) - Roswell, New Mexico - Area 51, Nevada - Extraterrestrial Highway (aka State Route 375), Nevada - Little A’Le’Inn, ET Highway, Nevada - E.T. Fresh Jerky, ET Highway, Nevada - Alien Research Center, ET Highway, Nevada - The Black Mailbox, ET Highway, Nevada Via Podcast is a production of AAA Mountain West Group .…

حدود یک سال پیش 39:39

MP3•خانه قسمت

– Jason

Segments

[0:10] The Lean Setup Guide from ProShop
[2:08] Manufacturing news: OK, Mexico, Save Me
[7:09] How automation technology has progressed
[9:49] The use of robots in automation
[11:38] Will robots replace machinists?
[15:51] The Industrial Buying Engine with Thomasnet™
[16:23] Check out the Oracle NetSuite ERP
[22:57] How to mitigate the risks of lights-out manufacturing
[27:20] If you don’t automate, you’ll get left behind
[28:30] What’s next for Titans of CNC and automation?
[31:53] How automation is different around the world
[36:00] There is a place for everyone in manufacturing

Resources mentioned on this episode

Lights Out: Training Machinists with an Automation Mindset with Titan Gilroy
How Defeat and Success Has Shaped Titan Gilroy, #286
TITANS of CNC
Connect with Titan on LinkedIn
Get 25% off an annual Thomas™ subscription with code CHIPS25
The Lean Setup Guide from ProShop

Connect With MakingChips

18 قسمت

#MBA #Business #Nick Goellner

Training Machinists with an Automation Mindset with Titan Gilroy, Ep #1

Lights Out: Technology and Automation Podcast by MakingChips

published حدود یک سال پیش

اشتراک گذاری

MP3•خانه قسمت

– Jason

Segments

[0:10] The Lean Setup Guide from ProShop
[2:08] Manufacturing news: OK, Mexico, Save Me
[7:09] How automation technology has progressed
[9:49] The use of robots in automation
[11:38] Will robots replace machinists?
[15:51] The Industrial Buying Engine with Thomasnet™
[16:23] Check out the Oracle NetSuite ERP
[22:57] How to mitigate the risks of lights-out manufacturing
[27:20] If you don’t automate, you’ll get left behind
[28:30] What’s next for Titans of CNC and automation?
[31:53] How automation is different around the world
[36:00] There is a place for everyone in manufacturing

Resources mentioned on this episode

Lights Out: Training Machinists with an Automation Mindset with Titan Gilroy
How Defeat and Success Has Shaped Titan Gilroy, #286
TITANS of CNC
Connect with Titan on LinkedIn
Get 25% off an annual Thomas™ subscription with code CHIPS25
The Lean Setup Guide from ProShop

Connect With MakingChips

18 قسمت

#MBA #Business #Nick Goellner

همه قسمت ها

Lights Out: Technology and Automation Podcast by MakingChips

1
Is Coaching the Key to Lights-Out Success? Ep #16 53:01

۶ weeks پیش53:01

53:01

What happens when cutting-edge CAM automation meets boots-on-the-ground manufacturing know-how? You get an eye-opening conversation that will challenge the way you think about the future of your shop—and your role in it. In this episode of Lights Out, we sit down with David Vuyk, a guy who’s walked every inch of the shop floor and now finds himself at the forefront of digital manufacturing transformation with CloudNC. But don’t expect a tech sales pitch—this is a candid, no-holds-barred look at the human side of automation and why real success hinges on more than just software. If you’ve ever felt the tension between adopting new technology and keeping your team engaged, this episode is for you. David shares his journey from mechanical designer, to job shop operator, to now driving customer success for bleeding-edge CAM automation. Along the way, he tackles the tough questions: What happens when programmers fear being replaced? How do you overcome resistance from the shop floor? And why is customer success just as important—if not more—than sales when it comes to scaling disruptive tech? But this isn’t just about change management—it’s about reimagining what your people can achieve when they're empowered, not threatened, by automation. We dive deep into the mindset shifts that shop owners and frontline leaders need to make to truly go Lights Out. Plus, they reveal why failing to engage your team can lead to churn, wasted tech investments, and missed opportunities for growth. Whether you’re a shop owner, an operations leader, or just someone who wants to future-proof your manufacturing business, you’ll leave this episode with a fresh perspective on how to turn resistance into results. The message is clear: if you can run lights out, you must run lights out—and it all starts with making your people the heroes of your automation journey. You will want to hear this episode if you are interested in... (0:47) Why you need to complete the Top Shops benchmarking survey (2:30) David Vuyk’s journey from mechanical design to CNC machining to tech solutions (10:31) Navigating resistance on the shop floor and managing change (13:03) Engaging frontline workers and leadership for tech adoption (14:53) Dave’s role at CloudNC and how he works with decision-makers (18:45) Elevating employees through automation, not replacing them (22:27) The CloudNC phased approach to customer success (25:04) Grow your top and bottom line with CLA (26:57) The StoryBrand framework: Communicating your company’s true value (34:17) Thinking beyond your product: Coaching customers for long-term lights-out success (38:42) Solving constraints beyond your offering (tools, processes, mindsets) (41:23) The responsibility of software teams to simplify adoption (42:16) Our final takeaways from the conversation (51:37) Check out the Machine Shop Mastery podcast! Resources & People Mentioned Grow your top and bottom-line with CLA Take the Top Shops Survey HIREMfgLeaders.com Storybrand Connect with David Vuyk Connect on LinkedIn CloudNC Connect With Lights Out LinkedIn MakingChips.com Subscribe to Lights Out On Apple and Spotify…

Lights Out: Technology and Automation Podcast by MakingChips

1
The Quiet Cut That's Loudly Threatening Small Manufacturing 35:09

۶ weeks پیش35:09

35:09

Most small manufacturers don’t realize they’re being quietly supported by one of the most impactful public-private partnerships in the country. The Manufacturing Extension Partnership (MEP) has long been the hidden backbone behind training programs, grant facilitation, process improvements, and critical tech upgrades for shops across the U.S. But recent Federal decisions to defund these programs—without clear communication or reasoning—have sparked confusion and alarm among industry insiders. In this episode, a passionate roundtable of manufacturers and advocates reveals just how deeply the MEPs have shaped their businesses, supported workforce development, and opened doors to opportunity they couldn’t have accessed alone. From AR-integrated quoting tools to automation investment guidance, these stories show a clear economic impact that extends far beyond individual shops—right into the health of local communities and the national manufacturing strategy. If you're just hearing about MEPs now, you're not alone—but you are at risk. This conversation lays out what’s at stake, why it matters, and what you can do right now to help save a resource that quietly powers tens of thousands of manufacturers nationwide. YouTube: https://youtu.be/WNjevmTNUu4 VideoAsk: https://www.videoask.com/fiyvfkcdd…

Lights Out: Technology and Automation Podcast by MakingChips

1
The Juice-to-Squeeze Ratio: Why Time Freedom Isn’t Optional for Shop Owners, Ep #15 47:30

۸ weeks پیش47:30

47:30

What if the real sign of a thriving machine shop isn’t how hard the lights are on—but how confidently you can turn them off? In this episode of Lights Out , we sit back down with Ryan Bankel of Imago Manufacturing to get into the guts of how a high-performing shop can run with minimal human presence and still crank out quality parts. This isn't about overnight success—it’s about obsessing, intelligently and intentionally, over what "lights out" actually takes, from tooling considerations to culture, chip control to checklists. Ryan pulls back the curtain on how he reengineered not just his machines but his mindset. He breaks down the daily “Lights Out Checklist” laminated on every machine, the unsexy decisions that fuel unattended machining, and the radical belief that automation isn’t just about more parts—it’s about more life . With bourbon in hand and clarity on tap, we get real about boundaries, freedom, and the juice-to-squeeze ratio that drives modern manufacturing forward. Whether you’re still tied to the spindle or just starting to imagine what your shop could look like without you in it, this episode offers a blueprint for rethinking everything—from how you spend your hours to how you scale your value. Automation isn’t just for the big guys. It’s for anyone ready to lead with intention, accountability, and maybe a little help from Bon Jovi. You will want to hear this episode if you are interested in... (00:00) Bourbon, broken phones, and kicking off part two (00:38) Why you should complete the Modern Machine Shop Top Shops Survey (03:10) Why “lights out” isn’t just for large shops (04:40) The role of positive constraints in Ryan’s business philosophy (08:09) Designing schedules for freedom—not burnout (11:55) Trust and autonomy: the cultural foundation of unattended machining (13:42) The case for decoupling the owner from the day-to-day (15:51) Live tooling, bar feeders, and why Okuma gets the job done (20:05) The Imago Manufacturing Daily Lights Out Checklist (21:38) The must-run-unattended mindset and its ripple effect (25:44) Ryan’s “three-day rule” for qualifying lights-out jobs (30:33) Real-world risks: scrap, tool failure, and power loss (33:48) Chip control, part ejection, and machine limitations (36:57) Checklist development from real pain points (41:27) Defining the juice-to-squeeze ratio and scoring process viability (44:09) How to access the Daily Lights Out Checklist + wrap-up (46:15) Check out the Buy the Numbers podcast! Resources & People Mentioned Complete the Modern Machine Shop Top Shops Survey How Ryan named Imago Connect with Ryan Bankel The Imago Manufacturing Daily Lights Out Checklist Imago Manufacturing Connect on LinkedIn Connect With Lights Out LinkedIn MakingChips.com Subscribe to Lights Out On Apple and Spotify Audio Production and Show Notes by - PODCAST FAST TRACK…

Lights Out: Technology and Automation Podcast by MakingChips

1
Automation: The Key to Time Freedom in Machining, Ep #14 41:46

10 weeks پیش41:46

41:46

Have you ever felt like the traditional path of working harder to get ahead isn't the answer? In this episode, Ryan Bankel, founder of Imago Precision Machining, shares the story of how he built his business from the ground up. What started in a garage has grown into a company with a strong focus on sustainability and automation. Ryan talks about how he carefully crafted his shop’s operations to run smoothly, even without him being physically present. His goal? Time freedom—not just for himself, but for his employees, too. As a self-taught machinist, Ryan didn’t follow the traditional path of learning in a formal setting. Instead, he honed his skills on the job, navigating the challenges of running a business while staying true to his vision. He reflects on the tough early years, working long hours to make ends meet and building a company that would eventually allow him the flexibility he always dreamed of. Through trial and error, he developed a model that works for him—a model that combines quality, innovation, and a commitment to time freedom. What stands out about Ryan’s journey is his approach to business growth. Unlike many entrepreneurs who focus on scaling for the sake of growth, Ryan has embraced a model that values sustainability and keeping the business at a manageable size. Ryan’s model prioritizes not just technology and automation, but also a strong shop culture and a sustainable pace of growth, challenging the common belief that bigger is always better. His approach ensures that his shop maintains a strong, close-knit culture, while still embracing modern technologies and automation. Ryan’s story is a powerful example of how success doesn’t have to mean sacrificing your values or your time. You will want to hear this episode if you are interested in... (0:00) Introduction to Ryan Bankel (0:31) Why you need to take the Modern Machine Shop Top Shop Survey (3:38) Our tour of the Imago shop (including the suave bathroom) (6:53) How we connected with Ryan on LinkedIn (12:13) Ryan’s journey into metalworking (21:59) From running a shop to launching Imago (24:42) The significance of Ryan’s decision to keep his shop small (29:30) Bringing in new technology & keeping employees engaged (33:03) What “time freedom” means for Ryan (37:24) Ryan’s evolving vision for his business: What’s next? (39:11) Stay tuned for part 2 to learn how Ryan runs his business lights out (40:57) Why you need to check out the MakingSparks podcast Resources & People Mentioned Machine Shop MBA: How to Become a Top Shop Complete the Modern Machine Shop Top Shops Survey Connect with Ryan Bankel Imago Manufacturing Connect on LinkedIn Connect With Lights Out LinkedIn MakingChips.com Subscribe to Lights Out On Apple and Spotify Audio Production and Show Notes by - PODCAST FAST TRACK…

Lights Out: Technology and Automation Podcast by MakingChips

1
The AI Revolution: Rethinking Automation with Al Whatmough, Ep #13 38:32

14 weeks پیش38:32

38:32

In this episode of Lights Out, we’re joined by a true innovator in the manufacturing space, Al Whatmough, CEO of Toolpath. Al brings a wealth of experience from his time at Autodesk and his leadership at Toolpath, where he’s driving the next wave of automation in CNC machining. Together, we dive into the revolutionary role that AI is playing in reshaping manufacturing operations, offering fresh perspectives on how automation can enhance productivity and streamline processes on the shop floor. Throughout the conversation, Al unpacks the exciting developments at Toolpath, including their acquisition of Chatter, a key technology that helps shops automate their operations more effectively. He shares his vision for the future of manufacturing, where AI doesn’t just automate processes but actively assists in decision-making, freeing up cognitive load for operators and improving workflow efficiency. We also explore the challenges traditional shops face when integrating new technology and how bridging generational gaps in the workforce is crucial for embracing the full potential of automation. This episode is a must-listen for manufacturing leaders looking to understand how AI and automation can create smarter, more agile operations. Al’s insights into the real-world applications of AI, along with his thoughtful reflections on industry trends, will inspire you to think differently about the tools you use and the systems you have in place. You'll want to hear this episode if you are interested in... (0:00) Chatting about our time at the MFG Meeting 2025 (3:06) Introducing Al Whatmough, CEO of Toolpath (3:40) Bridging the generational divide in manufacturing (6:20) Al's journey from Autodesk to Toolpath and what they aim to achieve (8:37) Building trust in AI and overcoming skepticism from more traditional shops (11:11) The acquisition of Chatter and how it enhances Toolpath’s capabilities (12:39) Why automation should focus on the mundane tasks to free up cognitive load (13:38) The dangers of chasing complex problems rather than solving simple ones (15:52) The importance of understanding customer needs and creating tailored solutions (18:13) The intersection of AI and existing technologies in modern manufacturing (21:24) Rethinking workflows with AI and improving the connection between tools (26:57) Know what you’re good at and learn to do it well (33:22) Reflections on the future of AI and automation in manufacturing Connect with Al Whatmough Toolpath Connect on LinkedIn Connect With Lights Out LinkedIn MakingChips.com Audio Production and Show Notes by - PODCAST FAST TRACK…

Lights Out: Technology and Automation Podcast by MakingChips

1
Make the Right Chips, Do the Right Work, Ep #12 39:51

17 weeks پیش39:51

39:51

Are robots really taking over human jobs, or is it the other way around? In this eye-opening episode of Lights Out, hosts Nick and Kaleb sit down with automation expert Max Falcone to challenge one of the biggest misconceptions in manufacturing: that automation replaces workers. Instead, they argue that too many people are still stuck performing tedious, repetitive tasks that should already be automated—tasks that drain productivity, increase injuries, and contribute to worker burnout. With over 23 years of experience in automation, robotics, and material finishing, Max brings a fresh perspective on how manufacturers can rethink their processes. As Vice President of Sales Engineering at PushCorp, he has helped countless shops integrate automation in ways that make businesses more efficient while creating better jobs for skilled workers. In this episode, you’ll hear why the right technology can help manufacturers maximize their workforce, eliminate bottlenecks, and improve safety—without sacrificing jobs. Plus, we dig into how manufacturers should be approaching automation today, from understanding the difference between passive and active compliance in robotics to identifying the right tasks to automate. If you’re a shop owner, machinist, or anyone in the manufacturing industry looking for ways to optimize operations and stay ahead of the curve, this is an episode you won’t want to miss. You will want to hear this episode if you are interested in... (02:00) Flipping the script: Are humans taking robot jobs? (3:00) Max’s journey into automation and robotics (12:00) The power of PushCorp (and why it matters) (16:33) Passive vs. active compliance in robotic automation (21:40) How automation can improve safety and efficiency in manufacturing (23:41) Why machine shops should rethink deburring and finishing processes (27:37) The importance of hands-on experience in engineering and manufacturing (31:56) Why the industry needs more problem solvers and skilled workers Connect with Max Falcone PushCorp Connect on LinkedIn Connect With Lights Out LinkedIn MakingChips.com Subscribe to Lights Out Audio Production and Show Notes by - PODCAST FAST TRACK…

Lights Out: Technology and Automation Podcast by MakingChips

1
The Throughput Mindset: How Automation and Culture Drive Success, Ep #11 48:35

19 weeks پیش48:35

48:35

What separates the best shops from the crowd? It’s not just the technology they use—it’s the way they think. The top manufacturing leaders aren’t content with operators who say, ‘I run a mill,’ or ‘She programs machines.’ Instead, they cultivate a culture where everyone is focused on one goal: increasing throughput. By aligning your people, resources, and technology to make your business successful, you build a team where nobody is a cog in the wheel—everyone is part of a powerful engine. For years, many in the industry have seen robotics and automation as unnecessary expenses, asking, ‘Why invest in a $200,000 robot loading cell when I could just add another spindle?’ But what if that mindset is holding your shop back from unlocking its true potential? By automating tasks like workpiece delivery and machine loading, you free your team to focus on high-value work, maximizing throughput and creating a culture of innovation and growth. We’ll also explore what the machine tool dealer of the future looks like, share real-world stories of shops that made the leap into automation, and address common concerns—like how much programming experience your team really needs. Whether you’re looking to inspire your team, adopt cutting-edge technology, or simply break free from outdated mindsets, this episode is packed with actionable advice and fresh perspectives. Tune in now to learn why throughput is more than just a metric—it’s a mindset that can transform your business. You will want to hear this episode if you are interested in... (1:54) Get to know Lights Out Co-host Kaleb Mertz (4:16) Max Rothenhausler’s origin story (10:43) The project that Max and Kaleb are spearheading (14:52)The importance of automation to career longevity? (17:04) Why is it easier to work with the end-user instead of the dealer? (20:22) Overcoming the old-school mentality and adopting automation (25:56) How much robotic programming experience do you need? (28:38) What would the machine shop of the future look like? (31:47) How to structure the machine shop of the future (33:41) The industry is lacking machinists (37:30) Take on a new product line—or find partners? (44:58) Your customer will always be your best salesman Resources & People Mentioned Business Moves at the Speed of Trust Connect with Max Rothenhausler Connect on LinkedIn 21st Century Machine Tools Connect With Lights Out LinkedIn MakingChips.com Subscribe to Lights Out Audio Production and Show Notes by - PODCAST FAST TRACK…

Lights Out: Technology and Automation Podcast by MakingChips

1
Business Moves at the Speed of Trust with Wade Anderson, Ep #10 39:32

25 weeks پیش39:32

39:32

In this episode of Lights Out, Wade Anderson, VP of Engineering and Automation at Okuma delivers a compelling look at how automation is transforming the manufacturing landscape. Along with Steve DeGrasse, the East Coast Regional Sales Director at Hennig, we uncover why tomorrow’s machine tools will require rethinking—like side-door access for robots and integrated pallet delivery systems—and how additive manufacturing and AI will reshape priorities even for small shops aiming to go lights-out. With a trust-first approach, Wade explains how maximizing a customer’s current capabilities builds the foundation for introducing transformative automation solutions. This conversation isn’t just about technology—it’s about people. We explore how sales strategies, compensation plans, and service roles must evolve to meet the demands of an automation-driven world. Fostering collaboration between sales professionals and engineers is critical for success and how the next generation of talent, raised with robotics, will lead the way. Packed with real-world insights and forward-thinking strategies, this episode is a must-listen for anyone navigating the future of manufacturing. Don’t miss their candid take on what it takes to build trust and drive innovation in a rapidly changing industry. – Nick You will want to hear this episode if you are interested in... Introducing Wade Anderson from Okuma [2:40] Steve’s hilarious IMTS Oyster story [8:11] How do we make machine tools automation friendly? [12:00] Should we adjust compensation plans for salespeople? [25:00] How does service need to evolve with automation? [30:50] Resources & People Mentioned Shop Matters Podcast on YouTube At The Boring Bar #1 Connect with Steve DeGrasse Connect with Wade Anderson Connect on LinkedIn Okuma America Connect With LightsOut LinkedIn MakingChips.com Subscribe to SHOW NAME Audio Production and Show Notes by - PODCAST FAST TRACK…

Lights Out: Technology and Automation Podcast by MakingChips

1
Chip and Coolant Management for Machining Automation with Blaser Swisslube and Hennig, Ep #9 40:23

28 weeks پیش40:23

40:23

In this episode of Lights Out , we explore how cutting-edge coolant technology is transforming manufacturing by enabling efficiency, stability, and sustainability. Tiffany Bryson and Christopher Porsch of Blaser emphasize the need for a repeatable, reliable process, noting that automation hinges on stable coolant systems. Scott Cooley, with Hennig, explains how tailored solutions address each customer’s specific materials and machining needs, with advanced filtration systems supporting lights-out operations by maintaining a clean, stable environment. Blaser’s approach to coolant as a “liquid tool” highlights its importance beyond mere maintenance—coolant is an essential investment in long-term productivity and profitability. Camoren Schley adds that high-pressure systems enhance heat dissipation and extend tool life, further stabilizing production. This episode dives into how the right coolant technology can solve key challenges, helping manufacturers optimize processes, reduce downtime, and prepare for continuous, efficient production. Don’t miss it! You will want to hear this episode if you are interested in... [1:09] Introducing today’s special guests [3:16] Everyone’s Day #1 IMTS experience [4:11] Manufacturing leader spotlight [9:10] Does technology change how you serve customers? [11:54] Understanding the chemistry of coolant [15:52] How high pressure can solve chip accumulation challenges [18:32] What does the term “liquid tool” mean to Blaser? [21:12] The importance of material compatibility [24:24] Reducing the amount of "sludge" created [28:16] How coolant helps with heat dissipation [31:42] What’s on the horizon for Blaser, Hennig, and Slytek? [37:09] Why foam control is incredibly important Resources & People Mentioned Blaser Swisslube Hennig Connect with Tiffany Bryson Connect with Christopher Porsch Connect with Scott Cooley Connect with Camoren Schley Connect With LightsOut LinkedIn MakingChips.com Subscribe to SHOW NAME Audio Production and Show Notes by - PODCAST FAST TRACK…

Lights Out: Technology and Automation Podcast by MakingChips

1
Are You Even Prepared to Run a Lights Out Shop? Ep #8 41:53

28 weeks پیش41:53

41:53

What do you need to know before you launch automation in your shop? What would be signs that you’re not ready to automate? If you’re launching the process, how can you use your ERP/MRP to the fullest? Even the smallest mistakes—like not having a process in place to deal with the chips your machines are creating while running lights out—can be costly. We want to help you avoid those costly errors. That’s why Paul Van Metre and Mike Payne join me to tackle the important things you need to consider before you run lights out. Because if you’re not MakingChips, you’re not making money. BAM! Segments [0:35] Why you need ProShop ERP [5:08] What’s new with the crew [6:43] Manufacturing Leadership Spotlight [13:52] Do you have a repeatable process? [19:03] NetSuite by Oracle [20:31] Do you have a chip management process? [23:48] Cutting tool management features [26:24] Are you making adjustments for accurate costs? [34:06] Do you have training in place for your team? [37:16] Do you have a preventative maintenance program? Resources mentioned on this episode The Oscar Mike Foundation Noah Currier The Checklist Manifesto NetSuite by Oracle Moseys Production Shop Tour Connect With MakingChips www.MakingChips.com On Facebook On LinkedIn On Instagram On Twitter On YouTube…

Lights Out: Technology and Automation Podcast by MakingChips

1
Connecting Advanced Machining Strategies to Business Results Part 2 26:10

28 weeks پیش26:10

26:10

Here’s our controversial take: We believe that “automated” is more important than “operated”. It’s a stance that scares a lot of operators—but it shouldn’t. In this episode of MakingChips, Mike Payne and Kaleb Mertz return to dive into part loading and pallet loading, a mixed vs fixed mindset, and why predictive is better than reactive. We’ll connect all of it back to every shop's end goal: business results. Don’t miss it! Segments [0:18] Learn about IMTS 2024 Sectors [4:03] Part loading vs pallet loading [9:53] Embrace a mixed vs fixed mindset [16:00] Manufacturing Transformed [17:32] Predictive is better than reactive [22:29] If you can sense it, you can do it Resources mentioned on this episode IMTS Sectors IMTS Community Go listen to the Manufacturing Transformed podcast Connect With MakingChips www.MakingChips.com On Facebook On LinkedIn On Instagram On Twitter On YouTube…

Lights Out: Technology and Automation Podcast by MakingChips

1
Connecting Advanced Machining Strategies to Business Results Part 1 28:48

28 weeks پیش28:48

28:48

Machine monitoring can give us insights into our machines that can and should change how we’re operating. The end goal is to drive better business results. But how should monitoring be paired with advanced business strategies to help you achieve those results? Mike Payne, Kaleb Mertz and I connect the dots in this episode of MakingChips. Because if you’re not efficiently MakingChips, you’re not making money. BAM! – Nick Goellner Segments [0:20] Learn more about IMTS 2024 Elevate [2:28] What we listen to at work [7:00] Manufacturing News: Technology Orders Grow [13:08] Latin America Conference at IMTS [15:02] Using ProShop for cutting tool management [16:11] Coaching is more important than monitoring [21:21] Adaptive controls and tooling optimizations Resources mentioned on this episode IMTS Elevate ChillHop Radio Pop Goes Classical on Spotify Erica Violet on Spotify Manufacturing Technology Orders Grow Despite Sustained High Interest Rates Connect With MakingChips www.MakingChips.com On Facebook On LinkedIn On Instagram On Twitter On YouTube…

Lights Out: Technology and Automation Podcast by MakingChips

1
A Samurai's Journey to Automation, Ep #5 46:25

28 weeks پیش46:25

46:25

Can small shops begin to automate their processes? Where do they start with automation? In this episode of MakingChips, the CNC Samurai, Steve Courchane, returns to share his passion for automation. He lays out his 3M process and how it changes the way you view automation. Because if you’re not modeling, making, or measuring—you’re not MakingChips. And if you’re not MakingChips, you’re not making money. BAM! – Jason Zenger Segments [0:20] Join the AMT community! [4:06] Update on my progress! [5:40] Welcoming Steve Courchane back [7:35] Machine Shop Masterclass [14:53] Manufacturing Leadership Spotlight [19:52] Who is the CNC Samurai? [23:30] Why branding was important to Steve [26:13] It’s time to graduate to NetSuite by Oracle [27:33] How Steve’s mindset has changed about automation [34:27] When Steve learned to love automation [36:37] Steve’s 3M process: model, make, and measure Resources mentioned on this episode Join the AMT community ! What the Heck is a Samurai CNC Machinist? Winning the War for Talent by Chris Czarnik Steve Courchane on Instagram Chris Luecke on LinkedIn The Cultish Show NetSuite by Oracle Connect With MakingChips www.MakingChips.com On Facebook On LinkedIn On Instagram On Twitter On YouTube…

Lights Out: Technology and Automation Podcast by MakingChips

1
How to Prioritize Flexibility when You Invest in Automation, Ep #4 36:09

28 weeks پیش36:09

36:09

POV: You’ve decided to start the process of implementing automation in your machine shop—but it isn’t as easy as flipping a switch. It’s a process that consists of failing forward and learning from every mistake. Tom Schroeder—the Executive Vice President at PBC Linear—joins us in this episode of Lights Out to share how to prioritize flexibility when you invest in and begin to implement automation in your shop. Because if you’re not making the right chips, you’re not making money. – Nick Segments [1:28] Learn more about Kaleb Mertz [4:04] Today’s guest: Tom Schroeder [5:16] What's the Chip on Your Shoulder? [11:44] PBC Linear’s investment in an MCM [16:52] Get NetSuite’s KPI Checklist [19:31] Managing high mix low volume [23:40] Steps to take before automating [27:11] Why automation is necessary [30:00] Innovation = learning to think differently [32:30] Automation doesn’t take away jobs Resources mentioned on this episode Get your free KPI checklist from NetSuite by Oracle! Kaleb Mertz on LinkedIn Tom Schroeder on LinkedIn Episode #399: Do We Need More Manufacturing Entrepreneurs? Connect With MakingChips www.MakingChips.com On Facebook On LinkedIn On Instagram On Twitter On YouTube…

Lights Out: Technology and Automation Podcast by MakingChips

1
How a Prototyping Shop is Shattering the Status Quo with Automation, Ep #3 45:00

28 weeks پیش45:00

45:00

Are you embracing automation in your shop? Or are you hesitating because you’re unsure how to implement it so that you’re making the best use of your time and money? Brian Kippen—the owner and CEO of KAD Models & Prototypes—reframes how you can use automation. In this episode of MakingChips, Brian Kippen, Steve DeGrasse, and I share how you can approach automation from a different perspective. Because if you’re not automating efficiently, you’re not MakingChips, and if you’re not MakingChips, you’re not making money. BAM! – Nick Segments [0:15] The Lean Setup Guide from ProShop [1:48] Introducing Brian Kippen and Steve DeGrasse [3:12] What's the Chip on Your Shoulder? [5:30] Brian Kippen’s origin story [20:36] How Brian approaches automation differently [24:28] Running his company like a barbershop [30:21] What Brian looks for in new talent [36:44] How Brian is using automated pallet delivery [41:10] Why Brian took a job as a high school teacher Resources mentioned on this episode The Lean Setup Guide from ProShop Connect with Steve DeGrasse on LinkedIn Connect with Brian Kippen on LinkedIn Connect With MakingChips www.MakingChips.com On Facebook On LinkedIn On Instagram On Twitter On YouTube…

Lights Out: Technology and Automation Podcast by MakingChips

1
Automation 101 with Chris Luecke Manufacturing Happy Hour, Ep #2 48:38

28 weeks پیش48:38

48:38

Automation continues to be a popular and divisive topic in the manufacturing world. Automation is important for attracting and retaining young talent and growing your business. So we’ve been working hard to highlight the importance of automation—and where you can dive in—with our Lights Out series. Chris Luecke—the host of Manufacturing Happy Hour—has a similar goal. We’re using our platforms to squash the rumors, lessen fears, and highlight how automation can and will benefit your business. Because if you’re not automating, you’re not making enough chips, and you’re missing out on money . BAM! Segments [0:20] The lean setup guide [2:26] When we embraced automation (and why) [4:03] Manufacturing News: NAM CEO Interview [7:33] Chris’s thoughts on our pre-show banter [10:38] How Chris got started in Manufacturing [19:53] Chris’s advice to sales management about new projects [22:38] Why automation has become a popular topic [26:07] Is the allure that automation has become more affordable? [31:00] Automation 101: Where do you start? [34;21] Automation doesn’t take people’s jobs away [36:40] IT/OT convergence and why it’s important [43:25] Chris’s assessment of cybersecurity in automation Resources mentioned on this episode NAM CEO talks on AI, banking, manufacturing, trade relationships, labor market The Manufacturing Happy Hour podcast Connect With MakingChips www.MakingChips.com On Facebook On LinkedIn On Instagram On Twitter On YouTube…

Lights Out: Technology and Automation Podcast by MakingChips

1
Training Machinists with an Automation Mindset with Titan Gilroy, Ep #1 39:39

28 weeks پیش39:39

39:39

Lights out manufacturing isn’t only a large topic of conversation but it’s also the way of the future. Shops around the world are embracing automation. Are you? If you haven’t become part of the automation conversation, don’t miss our first lights-out-focused episode with Special guest Titan Gilroy. He shares how automation has progressed, the mindset you need to embrace to be successful, and how to mitigate the risks. Because if you’re not automating, you’re not MakingChips. And if you’re not MakingChips, you’re not making money. BAM! – Jason Segments [0:10] The Lean Setup Guide from ProShop [2:08] Manufacturing news: OK, Mexico, Save Me [7:09] How automation technology has progressed [9:49] The use of robots in automation [11:38] Will robots replace machinists? [15:51] The Industrial Buying Engine with Thomasnet™ [16:23] Check out the Oracle NetSuite ERP [22:57] How to mitigate the risks of lights-out manufacturing [27:20] If you don’t automate, you’ll get left behind [28:30] What’s next for Titans of CNC and automation? [31:53] How automation is different around the world [36:00] There is a place for everyone in manufacturing Resources mentioned on this episode Lights Out: Training Machinists with an Automation Mindset with Titan Gilroy How Defeat and Success Has Shaped Titan Gilroy, #286 TITANS of CNC Connect with Titan on LinkedIn Get 25% off an annual Thomas™ subscription with code CHIPS25 The Lean Setup Guide from ProShop Connect With MakingChips www.MakingChips.com On Facebook On LinkedIn On Instagram On Twitter On YouTube…

Lights Out: Technology and Automation Podcast by MakingChips

1
Lights Out Intro 0:57

37 weeks پیش0:57

0:57

به Player FM خوش آمدید!

Player FM در سراسر وب را برای یافتن پادکست های با کیفیت اسکن می کند تا همین الان لذت ببرید. این بهترین برنامه ی پادکست است که در اندروید، آیفون و وب کار می کند. ثبت نام کنید تا اشتراک های شما در بین دستگاه های مختلف همگام سازی شود.

به بیش از 500 موضوع گوش کنید

TurboTax Deluxe 2024 Tax Software, Federal & State Tax Return [PC/MAC Download]

Mini Mic Pro Wireless Microphone for iPhone, iPad, Android, Lavalier Microphone for Video Recording - 2 Pack iPhone Mic Crystal Clear Recording with USB-C for Podcast, ASMR

Mighty Patch™ Original patch from Hero Cosmetics - Hydrocolloid Acne Pimple Patch for Covering Zits and Blemishes in Face and Skin, Vegan-friendly and Not Tested on Animals (36 Count)

پادکست هایی که ارزش شنیدن دارند

Lights Out: Technology and Automation Podcast by MakingChips « » Training Machinists with an Automation Mindset with Titan Gilroy, Ep #1

Training Machinists with an Automation Mindset with Titan Gilroy, Ep #1

پادکست هایی که ارزش شنیدن دارند

به Player FM خوش آمدید!

The Let Them Theory: A Life-Changing Tool That Millions of People Can't Stop Talking About

The Let Them Theory: A Life-Changing Tool That Millions of People Can't Stop Talking About

Microsoft Office Home 2024 | Classic Apps: Word, Excel, PowerPoint | One-Time Purchase for 1 PC/MAC | Instant Download | Formerly Home & Student 2021 [PC/Mac Online Code]

Amazon eGift Card - Bright Balloons (Animated)

The Let Them Theory: A Life-Changing Tool That Millions of People Can't Stop Talking About

راهنمای مرجع سریع

Lights Out: Technology and Automation Podcast by MakingChips « »
Training Machinists with an Automation Mindset with Titan Gilroy, Ep #1