Guy, JJ and Nathan Discuss what’s on the 3D Printing Communities Mind
…
continue reading
This Episodes Questions: Hi everyone, I am jeroen pattyn from belgium and im a 3D print hobbyist for 2 years now . Is there a possibility to use 2 different kinds of support on 1 model ? Sometimes i m thinking to use organics on one overhang and raster on the other . This for saving some time and getting better results . I was thinking first i coul…
…
continue reading
This Episodes Questions: Hello! I'm new to the 3d printing world (one week) and have enjoyed learning from your podcast. How do you recommend diagnosing and fixing printing issues with different filaments? So far Ive only run PLA and PLA+ through the Bambu x1C - I've got some TPU, Silk and ABS coming so it'd be good to be prepared for when someting…
…
continue reading
This Episodes Questions: When printing with large nozzles, do the same volumetric flow rate limits apply or do they scale with the larger nozzle? Such as PLA in 0.4 nozzle at <20 cubic mm/s, then with a 0.8 nozzle are you still limited by the material to the same flow rate or can you increase temp and tune settings to a higher flow rate? Thanks! Be…
…
continue reading
This Episodes Questions: How do you know when a nozzle is worn out? if printing normal PLA and PETG, do you have an expected lifespan such as X kg of filament? Comparing cheap AliExpress nozzles of basic material with name-brand or special alloys or coatings, is longevity increased or is the gain primarily on performance and heat transfer? Ben Than…
…
continue reading
This Episodes Questions: Just finished the latest episode where you guys talked about FreeCAD. I almost snapped when Guy said it was not parametric, or that "just recently changed". It's been like that since day one, almost 22 years ago. What Guy referred to was the Topological Naming Problem, the thing that happens when you remove a feature that a…
…
continue reading
![Artwork](/static/images/128pixel.png)
1
Favorite Prints, Printing PETG Fast, Print Dimensional Accuracy and MORE!!!
1:03:39
1:03:39
در پخش در آینده
در پخش در آینده
لیست ها
پسندیدن
دوست داشته شد
1:03:39
This Episodes Questions: I got into the hobby in the last year or so, and have been looking at lots of different printers for my second machine. I'm fascinated by the design of them. I have an older, second-hand, FlashForge educational model the "Inventor", and I rarely have to re-level my bed once it's dialed in. Why does the larger Voron design u…
…
continue reading
This Episodes Questions: Hey I want to get my first printer and can’t decide what to get. I am a cnc machinist and program parts using CAD softwares daily. I’m looking to start a little side hustle and produce practical parts/be creative with prints. I would prefer an enclosed printer but definitely can be persuaded otherwise. What printer is best?…
…
continue reading
This Episodes Questions: Hey fellas! I live in stony plain Alberta and the temp like to swing a solid 80 degrees celcius over the year. I'm doing a new stereo build for my car and want to put my lowly ender 3 neo to work! It's modded to all heck and I can put it in my workshop if I need a heated chamber. Now here's my question. In the summer it's n…
…
continue reading
This Episodes Questions: I'm really looking forward to hearing about Guy's experience putting together his latest Voron. If you guys could build your “ultimate Voron”, what would it be and what would be your application for it? James Are the phrozen machines any good or are they just bambu lab replicas? Tobias Raynor I am debating between a dual hy…
…
continue reading
This Episodes Questions: Hey guys! seems like you guys cant stop talking about Bhaam-Booo printers. so this question is about filaments. I like how manufactures clearly label their filaments what type of filament it is(PLA, PETG, ABS, ASA so on) but what I dont like is how different brands/manufactures filaments differ from one another... NOT ALL P…
…
continue reading
This Episodes Questions: Howdy! I just wanted to comment about the last podcast it was mentioned when you put a Bambu printer in LAN only mode bypassing the cloud it asks you for the 10 digit code. It doesn't do that anymore, you just have to enter the code once and it remembers it now. Leith In Canada today, a Prusa MK4 is $1099 CAD, Bambu's A1 is…
…
continue reading
This Episode's Questions: It seems to me that the 3D printer market is going to split into two types; the enclosed ecosystem (Apple) and the open source type (Android). Companies like Bambu want the enclosed ecosystem to build appliances that maximize profit potential. I'm OK with that because there is good value to consumers for products that “jus…
…
continue reading
This Episodes Questions: I want to make this printer as safe as possible but it will require a lot of power. AC powered heat beds are getting more and more common but every video I watch on the topic makes a point to talk about SSRs failing with the power on (closed circuit?) even when talking about high quality and over-spec SSRs. A thermal fuse w…
…
continue reading
This Episodes Questions: Hey guys, so, I wanted some advice. I've been looking to get a Bambu Lab printer but I'm wondering if it's worth the jump from the P1S to the X1C. For me, I run a small print farm for a vendor fair/craft show business. I print primarily PLA, PETG, and TPU but I enjoy enclosed printers so the P1P and A1 are out of the pictur…
…
continue reading
This Episodes Questions: I would be interested to hear you guys discuss safety with respect to fumes and plastic particles. I'm planning to park my EV3SE on a tall cabinet close to a large bathroom vent fan but I can already see the attraction of an enclosed CoreXY machine for better capture and control of fumes and particles. James I recently foun…
…
continue reading
This Episodes Questions: I really like the deep dives you guys do on the individual components and systems that make up a printer. It seems to me that hot ends seem to be the 3D printer-specific components that are advancing the quickest. Do you agree? If not then what is? James Hi guys,I'm from Tulsa, OK.I love the podcast! I love how you all appr…
…
continue reading
![Artwork](/static/images/128pixel.png)
1
Is Bambu Worth the $$$?, Hueforge Prints, Dimensional Accuracy and MORE!!
1:03:02
1:03:02
در پخش در آینده
در پخش در آینده
لیست ها
پسندیدن
دوست داشته شد
1:03:02
This Episodes Questions: Hey guys, I just bought a Mosaic Palette 3 pro, it works great and I’m making lots of thing with it; I’ve been seeing people printing color lithophanes with Bambu printers I and I want to print my own with my palette, is it possible to make them with palette? And if yes, how? Thanks guys, Altair For best print quality, and …
…
continue reading
Guy, JJ and Nathan discuss what has happened in 2023 and some predictions of what could be coming in 2024.توسط guydunlap@gmail.com
…
continue reading
This Episodes Questions: Hey guys, First of all, thanks so much for the podcast. I really enjoy the banter and the in-depth analysis you guys offer. With MMU's being so popular and with Bambu Lab's intro into the market with the AMS, I was immediately intrigued at the ability to hit a button and generate a multi-color print. However, in looking int…
…
continue reading
This Episodes Questions: Hello Guy, Nathan, and JJ, I might be interested in purchasing a 3d printer before the end of 2023. I have some experience with printers, but still kinda a beginner with them. I have previously owned a Bambu lab P1P and a Creality Ender 3 v2. If I wanted to purchase another printer this year, what are some great options $70…
…
continue reading
No new questions this week from the audience! So we have a great discussion about Nathan attending Formnext, The Bambu A1 Mini, Prusa and Bambu marketing styles and future of 3D Printers. Send us your questions! perfectfirstlayer@gmail.comتوسط guydunlap@gmail.com
…
continue reading
This Episodes Questions: Hello Guy, JJ, and Nathan, I was wondering if you could discuss the idea that the 3d printing "hobby" has come full circle from the early days of the Stratasys machines to the current crop of machines from BambuLab, Creality, Qidi, Flashforge and the myriad other manufacturers that aren't making "Open Source" machines. Also…
…
continue reading
This Episodes Questions: Another dedicated aussie listener, hey guys, thanks for a great podcast. My question is, I recently purchased a K1 Max, not many issues except hot end blockages 3 in as many weeks, it’s even causing under extrusion and have to disassemble the hot end to clear it out, thing is it seems to line the inside just above the nozzl…
…
continue reading
Other than a great discussion on the new Bambu Labs A1, here are this episodes questions: Based on a previous question you guys helped with, company I am consulting with purchased a Bambu X1 Carbon. We are successfully producing salable nylon/carbon fiber parts for ultra light canoes. Very happy with our purchase. So - next question. Thinking of se…
…
continue reading
This Episodes Questions and Comment: From: Michael Banicki Listening to your last episode I heard you talking about the labor intensive art of creating profiles for different slicers for different printers and materials. One thing I have found is that many of your 3D model websites like printables will also have downloads for different slicers and …
…
continue reading
This weeks listeners questions: Hey guys, love the podcast! Leveling - Spring, silicone spacers, wheel locks, use a piece of paper, use a feeler gauge, etc.... for those of us that don't have a BambuLab printer or some machine that auto-levels for you in that there are NO leveling wheels to adjust, what is your guys' step-by-step process for gettin…
…
continue reading
This Episodes Questions: Good Morning/afternoon/evening JJ, Nathan, and of course, Guy! I hope that you are all doing well and Nathan hasn't burned down down his studio yet. Love the podcast and all the content each of you are making. The different perspectives is really interesting to see and hear from you three. My question is pretty simple. With…
…
continue reading
This Episodes Questions: Hey guys, I'm a hobbyist and new to 3d printing. I have the budget right now for the P1P w/ AMS and would be able to save a bit for the X1C w/ AMS. I'm really debating between the 2 as I primarily print only PLA & PETG, and don't really see myself needing an enclosure for some of the other filamen types. I'm interested in m…
…
continue reading
This Episodes Questions: I have saved up enough money to buy a $200 3d printer. Can you give me a list of pros and cons of each printer and 3d printing in general? John Hey Guy, I'm working on starting a 3d printing business. I have only 1 3d printer, an ender 3 v2. This was my first 3d printer and I learned a lot in The past 2 years on this 3d pri…
…
continue reading
This episodes questions: With the new addition of podcasts to youtube music, do you guys have any plans of uploading podcasts to that platform on a separate channel? Shortandstumpy A month ago one of the capacitors on the mainboard exploded. It stunk quite bad but the whole 3D-Printer still works. I did use it for a long time but I didn´t do any up…
…
continue reading
This Episodes Questions: I'm planning to make an Iron man suit as a summer project, inspired by Frankly built, and I'm not sure what slicer has better support material, Cura or Prusaslicer. Almost every print will need to have supports, so this is important. Calvin Selin Hello Guy, JJ, and Nathan, I have a question about wiring as a result of addin…
…
continue reading
Had a tech issue here at PFL, and was only able to restore about half the podcast. Sorry! We still are puiblishing what we have and it's a really great conversation for it's length. Thanks so much for listening!توسط guydunlap@gmail.com
…
continue reading
This Episodes Listener Questions: Hello guys, I'm a listener from the Netherlands. I really enjoy your podcast, so keep up the good work! 🙂 As a wannabe printer owner I'm in search for a printer that fits my needs. What I'm looking for is: - ease of use - reliability - print quality - 350 euro/dollar max I'd really hate to spend much time on the pr…
…
continue reading
This episodes questions: Jacob With the recent debacle between Bambu and Prusa. I was wondering about Bambu patents. As far as I am aware a patent is only enforceable if it was an original thought. The only two things I can even think Bambu has added to the knowledge the community had is the “LIDAR” and the more precise carbon rods. Everything else…
…
continue reading
This Episodes Listener Questions: From Hurz: How does Guy feel about wood filled filament? From Derek: Hello from Tasmania! Really enjoying the 3D printing podcast after consuming most of the woodshop life podcasts. I also started in woodworking and have branched out to 3D printing after getting a second hand Creality CR6-SE about a year ago. My qu…
…
continue reading
Here are this weeks listener questions: Hurz Hello Guy(s), how is it that Prusaslicer is so awesome in regard to multimaterial painting and so bad at handling IDEX in general? When using an oozeshield the temperature management is poor i.e. the next extruder reheat is not predicted so it takes a lot of time because isn't done while the other head i…
…
continue reading
![Artwork](/static/images/128pixel.png)
1
Is Direct Drive For Me? Which Bed Leveling Method Works Best, Basmbu Labs Software and Much More!
53:18
Here are the Questions for this weeks podcast: Lawrence from Toronto I have an ender 5 with the extruder set up with a bowden tube. If I change over to direct drive, what are the immediate benefits to me? Can I go faster? Does it print better? And if i do upgrade, can you recommend an all in one unit? Or should I go the DIY route and use the parts …
…
continue reading
Todays Questions: Jim From Nashville Hey guys! I am wanting to build a voron 2.4 from a Fysetc kit, and I have always questioned that the printed parts need to be ABS. If I am not going to use an enclosure or print ABS, do I need to print the parts in ABS? How about a general discussion of the 3 main types of filament (PLA, PETG and ABS)? I have an…
…
continue reading
This episode was kind of a free for all conversation. It takes some great twists and turns and a lot of different subject are covered. Remember we need your questions! Make sure to go to perfectfirstlayer.com and go to the submit page.توسط guydunlap
…
continue reading
Questions: Hello! I have an Artillery Sidewinder X2 and would like to install Klipper on it to see if I can print faster. Since Klipper requires a Raspberry Pi, and it seems that they are too expensive, what are my options? There are so many different things to choose from and not sure which offers the best bang for the buck. Steven Hi Fellas, I am…
…
continue reading
We are here to answer and discuss your questions! Please go to our submit page at perfectfirstlayer.com and ask us anything 3D Printer related! Here are the questions from our listeners this episode: Hey guys. Just found your podcast and binged the first episodes and really enjoyed them! I do have a question for you. I am having an awful time with …
…
continue reading
![Artwork](/static/images/128pixel.png)
1
Getting your printer to go FAST! And more on Bambu Lab!.
1:02:43
1:02:43
در پخش در آینده
در پخش در آینده
لیست ها
پسندیدن
دوست داشته شد
1:02:43
First we tackle a question from Xavier in LA: I really want to speed up my printing. I have an ender 3 v2 and it's still a stock printer. What are some good upgrades for me? What are the problems that can arise with the equipment as I speed things up? Do I need to replace the stock hot end and control board? I know, a lot of questions. I think that…
…
continue reading
![Artwork](/static/images/128pixel.png)
1
Klipper, Bambu Lab, Prusa and MORE!!
1:02:00
1:02:00
در پخش در آینده
در پخش در آینده
لیست ها
پسندیدن
دوست داشته شد
1:02:00
The guys answer a question from Jim in St. Loius: "I keep hearing about how great Klipper is. Unfortunately it seems when I try to learn about it, I am met with a long and complicated installation. And the Klipper website is even worse. Can you recommend a site or actually explain the process of installation? And do I really need it? I have an Ende…
…
continue reading
The guys discuss where they like to download ready made files, and then have a lengthy discussion abouot the different 3D modeling softwares that are available.توسط guydunlap
…
continue reading
The guys discuss the state of 3D printers and the directions the manufacturers are taking regarding updates to the technology. Is it about innovation or just price?توسط guydunlap
…
continue reading
Guy, Nathan and JJ discuss the wonderful world of slicers. The most relevent settings, how to "tune" them for your printer or filament and all kinds of very cool things.توسط guydunlap
…
continue reading
The guys talk about what's best to upograde on a new printer, and what's best to just leave aloneتوسط guydunlap
…
continue reading
In our very first episode, Guy, JJ and Nathan give a little background on themselves.توسط guydunlap
…
continue reading